Black Eagle Instinct 400 Spine, 6

Instinct arrow are designed to be more shootable, the Micro-Diameter size helps to offset the off-center design of most recurve and longbow risers made today

Each Instinct arrow's cresting is hand painted and quality inspected. This gives you custom arrow quality, and an attractive traditional look, all at a VERY affordable price. Traditional archers should no longer have to use traditional arrows.

The Black Eagle Instinct arrow is the only wood grain micro-diameter carbon traditional arrow available today, crafted for enhanced shootability. It features a Micro-Diameter size that compensates for the off-center designs of current recurve and longbow risers while maintaining an attractive wooden aesthetic thanks to a custom hand-painted cresting and durable Duracoat finish. Each arrow is paired with super tough 100-grain stainless steel outserts to optimize arrow performance for traditional archers, ensuring straightness, spine matching, so you can have the weight up front where you want it.

To install the outsert:
Select the right outsert for the right shaft.
Dry fitting is recommended on all components. Slide Outserts over shaft and spin test (if you prefer).
If Outserts does not fit that is OK. Get some 100 Grit sand paper and lightly sand the shaft in a circular motion until the outsert fits snug on shaft. Start slowly so you don't remove to much off the arrow.
Wipe dust off of the shaft with Clean paper towel. (No Cleaners are recommended).
Again, Spin test to ensure concentricity. Rotating outsert until it spins perfect.
Use a Silver or Black Sharpie and mark the Shaft and the Outsert for perfect alignment.
We have tested Our fletching glue, insert/outsert glue and epoxy and all of them work great.
Apply a even amount of glue around the shaft to ensure the glue channels get enough glue in them to hold.
Once The outsert is glued on stand the arrow on the nock end to dry.