Kral Arms Puncher Mega Synthetic PCP Air Rifle

This Kral .22 cal pcp air rifle is the most accurate pcp I've got. At 20 yards it's not pellet picky like my other pcps, shot group of five pellets in one tatered hole with 15 and 18gr JSB pellets. Makes groups with 14gr Crossman round nose and hollow point almost as good. JSB 25gr deep and shallow do good, but not so good with JSB 25gr redesigned. I have 8PCP guns and this Kral .22 is the least pellet picky.

Better moderator, the mega 2 has it already.

Side leaver is a little sloppy, but works OK.

Im just getting into pcp rifles . This is the 1st one I've shot. It's a little heavy for me, I only have use of left side. It took me about 7 shots to get scope zeroed in. Then my 1st 5 shot group,all within a 1/2 inch group. 4 inside 1 hole and 1 touching about a 1/4 in. group. Very happy

Nothing, except wish it is regulated

Can't beat the price

Smooth side lever action,accurate,dont know about durability,havent owned it long enough. Easy to carry,shoots slugs,you won’t be disappointed

Maybe an adjustable cheek rest?

The utg scope comes with mounts high enough for the magazine. The 12 shot magazine requires the scope mount a little higher (medium height)

This Kral is worth every penny its a awesome airgun. I put a OdB supressor on it and man its quiet, not too pellet picky and those magazines can fit all kinds of sizes like the JSB 33.9 gr beast in them. Quality gun for the those who are looking for something solid.

None

The price for the quality you get 5 star IMO.

Everything the best air gun l every bought. I own fifteen or more this is best one cocks like a dream shoots very accurate. Buy it you wont regret it. The safety is so easy on and off nice position to l cant say enough good things about this PCP.

Absolutely nothing

Buy it

Power, accuracy, looks, and feel. It really does get around 975 fps with standard crosman lead pellets(14.3s). The side lever is a great feature, and I upgraded mine to the jumbo biathlon lever. Much nicer feel to it. Parts for most of the puncher series are interchangeable, a plus when it comes to tinkering.

Make the air tube out of aluminum to help with the front heavy tilt of the rifle. It's not bad, but with the synthetic stock it is noticeable. Add some baffles to the shroud to quiet this bad boy down.

I installed an NP-03 16" barrel and a full shroud with 8 Mrod baffles, and drilled out the barrel bushing into an air stripper. Made this rifle super quiet, and it still gets over 900 fps with 14.3 grain pellets. It's preferred pellet is the H&N terminator 16.36 going 875 fps. I haven't even adjusted the hammer spring tension, it's fully backed out, so there is room for more power if needed.
At the sale price of $350, you can't afford not to own one of these rifles.
Hands down, it runs circles around the coveted Marauder.

This rifle is one of the best 22 cal. shooters you can get for the money! Quarter size groups with pellets of 16grs - 21grs out to 60yds JSB & H&N! Shot count with the 12 shot mag. is about 48 before shots start to drop. The trigger is lite and crisp and adjustable. Rifle does have a bark. Kral is a TOP NOTCH rifle! It just doesn't have the bells and whistles the higher priced guns have.

Add baffles and regulator to make this rifle AWESME!

Very accurate and consistent for the money.

Make it with 1/2 inch unf threads for a moderator. Make the mags more durable. Have a factory male foster fitting for ez filling instead of a fill probe.

You have to purchase a separate male foster fitting with 1/8 inch female threads to be able to fill it.

The magazines are easy to load and I can shoot jsb beast 34 grain pellets and slugs right from the standard magazine. So far I've been shooting a few slugs and blowing soda cans away at 50 yards. I love turning the power wheel down I'm putting in some crosman premier domed or jsb Hades and stacking one on top of another at 50 ft which is ideal for my backyard and the noise is non-existent from the gun what the noise of impact is louder if it hits anything solid like old books and tin cans . All the birds out eating the bird seed don't even fly away when you shoot it. Just about everything you could ever want with a nice smooth side lever, power adjuster and the adjustable riser on the stock for a cheek weld.

Of all the things I do like I wish there was some baffles so I used the baffle from a crosman trail and put it inside of some PVC that I painted gunmetal gray. It screws right onto the end of the barrel and I cut it down so that it would spread right into the shroud and now I can shoot anything on high power and you can't hardly even hear it!

I hadn't filled my SCBA tank so I used my hand pump to get ready to go to the range and set the gun in the corner of my air-conditioned house and went down to the kitchen when I heard a loud hissing noise coming from the other room and discovered that I blew the burst disc. I had some spare discs from my HPA compressor so I was not down very long and tomorrow it's time to go out on the farm and take care of the iguana issue. Be careful not to overfill the pressure and pay attention to the gauge on the gun not the pump. Of course burst discs are not all that perfect and sometimes they do fail when they really shouldn't but I won't have that problem again.

Shipping was faster than expected despite the label on the website saying it might take a while because of covid-19. Unboxing and checking things look very good and I put some air from my tank but was only able to pressurize to 170 bar. That was sufficient enough just sight in a scope and run to magazines a various pellets and play with the power adjuster. I only got about 20 yards of range for my backyard and I was stacking JSB Hades and crosman premier domed on low power setting. I loaded a MAG after using the hand pump and shot some AVS slugs out to a hundred yards and was hitting soda cans. I guess I have to go down and help my friend on the farm here in South Florida and get some chicken of the tree iguanas!

The gun shoots a little bit loud and I expected that after reading reviews and so I ordered this baffle from pyramyd air at the same time, Crosman NP214-001 Trail Baffle. I got a piece of PVC from the hardware store that just big enough inner diameter to slide this baffle in with a thin layer of cloth wrapped around it. I was able to screw this directly onto the end of the barrel and I shaved down the end where it meets up with the existing shroud so that I could thread it into the existing shroud and I can shoot anything on high power and the gun makes no noise comparatively. I had to remove the air filter cover in order to attach this new moderator but I also can use some hair curlers and some plastic tubing two space two or three of them out and that also will work without sacrificing the air filter cover but I like the looks of the PVC that I painted gunmetal gray on the end of the Black gun.

I pumped it up to go out to the range with my hand pump because I have not filled my SCBA tank and the guage on the pump is a little bit different than that on the gun and I must have put a little too much because I parked it in the corner of my air-conditioned house and went to get some dinner in the kitchen what I heard a hissing noise. I blew the burst disc and happen to have one for my HPA compressor so be careful not to over pressurize even just 15 or 20 bar!